我们都知道,当我们建造拖车时,我们都知道我们需要选择一个平坦的地方来建造拖车。为什么我们在建造工程板房的时候要找一个平坦的地方呢?很多人不理解这个要求。
We all know that when we build trailers, we all know that we need to choose a flat place to build trailers. Why do we need to find a flat place when building engineering plank houses? Many people don't understand this requirement.
1. 在工程板房的建造中我们需要选择一些平地的原因是我们在建造工程板房的时候肯定不会单独清理地面,所以我们必须选择平地作为施工现场,这样会比较简单。
1. The reason why we need to choose some flat ground in the construction of the Engineering Plank house is that we will certainly not clean the ground alone when building the Engineering Plank house, so we must choose flat ground as the construction site, which will be relatively simple.
2. 我们还在地面上建造了工程板房。板房的支撑点是,如果地面不平,你建的板房就会变形。你不喜欢在这样的环境中在地面上工作,所以选择平坦的地方建造板房的原因是一样的。
2. We have also built engineering plank houses on the ground. The supporting point of plank house is that if the ground is uneven, the plank house you built will be deformed. You don't like to work on the ground in such an environment, so the reason for choosing a flat place to build a plank house is the same.
济南工程板房内的电线采用PVC管(槽)布线,整齐美观,电气配置符合设计要求,电线不老化绝缘,连接长度不长。粘贴墙板安装正确,表面光滑,预埋墙板安装平稳,设置上下搭接,外板向下搭接,搭接长度不小于15mm。
The wires in the board room of Jinan project adopt PVC pipe (slot) wiring, which is neat and beautiful. The electrical configuration meets the design requirements. The wires are not aged and insulated, and the connection length is not long. The installation of pasted wallboard shall be correct, the surface shall be smooth, the installation of embedded wallboard shall be stable, the upper and lower lapping shall be set, the outer plate shall be overlapped downward, and the overlapping length shall not be less than 15mm.
防火:防火间距应符合设计和规范要求,消防通道应畅通;消火栓和灭火器应按照设计要求配置,合理布置;在厨房等有火灾的地方应采取有效的防火保温措施;金属夹芯板的氧指数不得低于32;木地板等易燃材料应进行防火处理。
Fire prevention: the fire prevention distance shall meet the design and specification requirements, and the fire fighting passage shall be unblocked; the fire hydrant and fire extinguisher shall be configured and arranged reasonably according to the design requirements; effective fire prevention and insulation measures shall be taken in the kitchen and other places where there is fire; the oxygen index of the metal sandwich panel shall not be less than 32; the fire prevention treatment shall be carried out for the wood floor and other combustible materials.
防腐蚀:钢构件油漆良好,无锈蚀,暴露在外的螺栓应做好防护。强腐蚀环境下的防腐措施应满足设计要求;工程板房周围应排水通畅,无积水,无杂物。
Anti corrosion: the steel members shall be well painted and free from corrosion, and the exposed bolts shall be well protected. The anti-corrosion measures under the strong corrosion environment shall meet the design requirements; the drainage around the engineering board room shall be smooth, without ponding and sundries.
以上是
济南工程板房小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.lxcaigang.com
The above is the relevant content introduced by Jinan engineering board house small edition. If you want to know more, please visit the website: http://www.lxcaigang.com