在
济南活动板房的建设中，要搞好防范措施和注意事项，使活动板房更为牢固，事实上，不但是活动板房，一切施工工地都需要搞好防范措施，使我们一起来看看怎样做到它，它须严格执行施工进度计划实行。
In the construction of movable plank houses in Jinan, we should do a good job in safety precautions and precautions to make the movable plank houses more solid. In fact, not only movable plank houses, but also all construction sites need to do a good job in safety precautions. Let's look at how to achieve it. It must be implemented in strict accordance with the construction schedule.
先要注意的是，一切螺丝或有关部件都可以自由拆装，由于那样的挪动室是利用不一样的部件相互连接的，假如拆卸了，将危害挪动室的稳定度和特性，包含必须注意排污沟的建设，以防止存水的产生。
First of all, it should be noted that all screws or related components can be disassembled freely. Since such mobile chambers are connected with each other by different components, if disassembled, the stability and characteristics of the mobile chamber will be endangered, including the construction of sewage ditches to prevent water storage.
除此之外，假如要在活动板房中日常生活，不太可能在房间内，尤其是炉具等房间内采用用火，对一些相对性非常容易浸蚀的部位开展按时的防锈处理和漆料，便于进行对应的设备维修保养工作中。
In addition, if you want to live in a movable plank house, it is unlikely to use fire in the room, especially in the stove and other rooms. Carry out timely rust prevention treatment and paint on some relatively easy to etch parts, so as to facilitate the corresponding equipment maintenance.
进而增加移动板房的使用期限，防止危害其使用期限，包含挪动屋子自己的承载力是有局限的，因此在应用它时，先事前掌握承担规范，才可以进行应用。
In order to increase the service life of the mobile plank house and prevent endangering its service life, including the bearing capacity of the mobile house itself, there are limitations. Therefore, when applying it, it is necessary to master the bearing specifications in advance before it can be applied.
1、房屋的面板应装稳定，房檐该是直的，面板的钢筋搭接方位应恰当和一致。
1. The panel of the house should be installed stably, the eaves should be straight, and the overlapping orientation of the reinforcement of the panel should be appropriate and consistent.
2、活动板房的电源电路应遮盖PVC管(槽)，走线齐整美观大方，电气设备构造合乎设计规定，无绝缘衰老，使用期限长。
2. The power circuit of the movable plank house shall be covered with PVC pipes (grooves), with neat and elegant wiring, and the electrical equipment structure shall meet the design requirements, without insulation aging and long service life.
3、活动板房的围护结构板(屋顶板和板墙)不应该有突出的形变和毁坏;固定不动地脚螺栓、防潮密封圈、金属材料密封圈、尼龙板等需详细靠谱，密封剂要详细合理。
3. The enclosure structure plate (roof plate and plate wall) of the movable plank house shall not have prominent deformation and damage; Fixed anchor bolts, moisture-proof sealing rings, metal sealing rings, nylon plates, etc. shall be detailed and reliable, and the sealant shall be detailed and reasonable.
4、避雷:防雷接地线设备合乎设计方案和标准规定，接地线电阻应符合规定。
4. Lightning protection: the lightning protection grounding wire equipment shall conform to the design scheme and standard provisions, and the grounding wire resistance shall conform to the provisions.
5、防腐蚀:钢预制构件应涂抹漆，耐腐蚀，用曝露地脚螺栓妥当维护;强浸蚀自然环境下的防锈对策应满足设计规定;挪动室四周应顺畅排水管道，不可存水，不可有脏物。
5. Corrosion prevention: the steel prefabricated components shall be painted to be corrosion-resistant and properly maintained with exposed anchor bolts; The anti rust measures under the strong etching natural environment shall meet the design requirements; The moving room shall be surrounded by smooth drainage pipes without water or dirt.
6、应恰当布局附墙板，使墙板表层光洁;置入板墙应装稳定，应选用左右钢筋搭接，外侧往下重合，钢筋搭接长短不可低于15mm。
6. The attached wallboard shall be properly arranged so that the surface of the wallboard is smooth; The embedded plate wall shall be installed stably. The left and right reinforcement shall be overlapped, and the outer side shall be overlapped downward. The overlapping length of reinforcement shall not be less than 15mm.
This is the end of the safety precautions and precautions for prefabricated houses. If you have any questions you don't understand, please come to our website http://www.lxcaigang.com Consult!
