工程板房安装须具有在技术监督备案才能进行施工，并且工程板房的生产企业，应提供完整的建筑结构安装图纸、产品出厂合格证等。那么，工地
济南工程板房搭建有哪些施工要求?下面跟小编一起来了解一下!
The installation of engineering plank houses can only be carried out after being filed in the technical supervision, and the manufacturer of engineering plank houses shall provide complete building structure installation drawings, product factory certificates, etc. So, what are the construction requirements for the construction of plank houses in Jinan Project? Now let's get to know with Xiao Bian!
一、工地工程板房搭建施工要求
1、 Construction requirements for construction of plank house on construction site
(1)工程板房安装，应由具有相应资质的施工企业、或生产厂家承担。安装单位应根据合同文件、安装图纸以及相关标准编制安装施工方案，并按方案组织实施。
(1) The installation of engineering plank houses shall be undertaken by construction enterprises or manufacturers with corresponding qualifications. The installation unit shall prepare the installation construction scheme according to the contract documents, installation drawings and relevant standards, and organize the implementation according to the scheme.
(2)工程板房层数多不应超过2层，每层建筑面积不应超过300㎡，并且大于200㎡时，其疏散楼梯的数量不应少于2部。房间门楼梯的大距离不应大于25m，楼梯的净宽不应小于1.1m。宿舍房间的建筑面积不应大于30㎡，房间门应朝疏散方向开启。
(2) The number of floors of the project plank house shall not exceed 2, and the building area of each floor shall not exceed 300 m2, and when it is more than 200 m2, the number of evacuation stairs shall not be less than 2. The large distance from the room door to the stair shall not be greater than 25m, and the clear width of the stair shall not be less than 1.1m. The building area of the dormitory room should not be more than 30 m2, and the room door should be opened towards the evacuation direction.
(3)工程板房安装完成后，应由安装单位进行自检，经自检合格后应由施工总承包单位组织监理单位、使用单位、安装单位进行联合验收，合格后方可交付使用。
(3) After the installation of the prefabricated house, the installation unit shall conduct self inspection. After the self inspection is qualified, the general contractor shall organize the supervision unit, the user and the installation unit to conduct joint acceptance, and the house can be delivered for use only after it is qualified.
二、工程板房硬性要求——防火
2、 Hard requirements for engineering board room - fire protection
(1)所有临时工程板房材质须为新型阻燃材料，临时工程板房建筑层数都不超过2层，并按要求设置疏散楼梯。
(1) All temporary project plank houses must be made of new flame retardant materials. The number of floors of temporary project plank houses shall not exceed 2, and evacuation stairs shall be set as required.
(2)临时工程板房防火部位须配置合格、有效、数量充足的灭火器材，并专人负责定期检查、维护、保养。
(2) Qualified, effective and sufficient fire fighting equipment shall be provided at the key fire prevention parts of the temporary project plank house, and special personnel shall be responsible for regular inspection, maintenance and repair.
(3)临时工程板房用电须符合《施工现场临时用电技术规范》要求，宿舍、办公用房内不允许使用大功率电器和私拉乱接电线等。
(3) The electricity used in the temporary project board room must comply with the requirements of the Technical Code for Safety of Temporary Electricity Use on Construction Site. It is not allowed to use high-power electrical appliances and connect wires without permission in the dormitories and office rooms.
(5)临时工程板房搭设完毕后，要经过建设、监理、施工单位及生产厂家对临时用房的结构性能、室内用电、消防设施等共同进行验收，验收合格后方投入使用。
(5) After the erection of the temporary project plank house, the construction, supervision, construction unit and manufacturer shall jointly check and accept the structural performance, indoor electricity, fire fighting facilities, etc. of the temporary house, and put it into use after passing the check and acceptance.
(6)不得携带易燃易爆物品进入宿舍、办公用房、会议室等人员密集的地方。
(6) Inflammables and explosives shall not be carried into the dormitory, office space, meeting room and other crowded places.
What are the construction requirements for the construction of plank houses on the construction site? We explained this problem to you from two aspects. You should pay more attention to the details when building to ensure the quality of the project. Come here for more information http://www.lxcaigang.com Ask and understand!
