为了更好的防水，在
济南彩钢板安装完成后，用专用工具将彩钢板在靠近屋顶处折叠3CM，约800cm，运输屋架将彩钢板安装完成，用搭接结构将彩钢板牢牢地固定在钢屋架上，具体施工可采用棕绳或铅丝绑牢，避免刮风时对彩钢板造成任何损坏，但是在施工的时候，还需要注意一些相关的问题。
In order to better waterproof, after the installation of Jinan color steel plate, use special tools to fold the color steel plate 3CM near the roof, about 800cm, and transport it to the roof truss to complete the installation of color steel plate. Fix the color steel plate firmly on the steel roof truss with a lap structure. For specific construction, brown rope or lead wire can be used to fasten it to avoid any damage to the color steel plate when the wind blows. However, some related problems need to be noted during construction.
屋顶盖板应在屋顶完工后尽快建造。如果不能立即施工，应使用塑料布保护屋顶的隔热材料，以防雨天影响隔热效果。屋面盖板施工时，屋面与屋面盖板之间的密封应可靠。
Roof coverings shall be constructed as soon as possible after the roof is completed. If the construction cannot be carried out immediately, plastic cloth shall be used to protect the thermal insulation material of the roof to prevent the impact of rain on the thermal insulation effect. During the construction of roof cover plate, the sealing between roof and roof cover plate shall be reliable.
将屋顶吊装到屋架上安装时，要注意先安装彩钢板的阴肋。如果没有安装母肋，应立即进行调整，确保板材的安装位置正确，并检查其与屋顶天沟的垂直度。在所有尺寸准确后，固定一层地板，以同样的方式安装后续地板，并始终使用定位县，以确保彩钢板的末端整齐地排成一条直线。
When the roof is hoisted to the roof truss for installation, attention shall be paid to the installation of the internal ribs of the color steel plate first. If the mother rib is not installed, it shall be adjusted immediately to ensure that the installation position of the plate is correct, and its perpendicularity to the roof gutter shall be checked. After all dimensions are correct, fix one floor, install the subsequent floor in the same way, and always use the positioning county to ensure that the ends of the color steel plate are neatly aligned.
安装后，立即清理留在车顶上的金属碎片，如飞溅的碎片、拉铆钉杆和丢弃的紧固件，因为这些金属碎片会导致彩钢板腐蚀。
After installation, immediately clean the metal fragments left on the roof, such as splashed fragments, rivet rods and discarded fasteners, because these metal fragments will cause corrosion of color steel plates.
为避免因施工不当造成的扇形或分散的彩钢板或屋顶底边不平整，在彩钢板上放置时应检查彩钢板是否对齐，并随时测量彩钢板上下两端边缘与天沟的距离是否相等，以避免彩钢板出现倾斜。
To avoid fan-shaped or scattered color steel plates or uneven bottom edges of the roof due to improper construction, check whether the color steel plates are aligned when placed on the color steel plates, and measure whether the distance between the upper and lower ends of the color steel plates and the gutter is equal at any time to avoid the color steel plates from tilting.
In order to avoid dangerous accidents due to improper installation, we should carefully check the fixation of the steel plate after installation to ensure that the steel plate is properly installed and firmly installed. At the same time, we should clean up the surrounding debris to avoid pollution. More relevant content will come to our website http://www.lxcaigang.com Consult and understand!
