建筑行业改变了以砖、瓦、灰、石为主要的建筑材料格局，出现了彩钢板结构建筑。但也存在着它的不足，比如说彩钢板，主要问题是：屋顶，铆钉处、板缝处有渗漏现象，影响到正常使用。那么
济南彩钢板接缝漏雨了怎么应对？
The construction industry has changed the pattern of building materials mainly consisting of bricks, tiles, ashes and stones, and a color steel plate structure has emerged. However, there are also its shortcomings, such as color steel plate. The main problem is that there is leakage at the roof, rivets and seams, which affects the normal use. How to deal with the leakage of Jinan color steel plate joints?
1、可在缝处两端涂刷宽60mm阳光2000PA单组份防水胶，缝邻近20mm不涂。
1. 60mm wide sunshine 2000PA single component waterproof adhesive can be applied at both ends of the joint, and 20mm adjacent to the joint shall not be applied.
2、无纺布，布宽150mm，粘贴在涂阳光2000PA防水胶上面。www.lnksmjg.com
2. The non-woven fabric, with a width of 150mm, is pasted on the sunlight 2000PA waterproof adhesive. www.lnksmjg.com
3、在无纺布或玻璃纤布上涂刷3遍，涂刷时后一遍比前一遍宽50mm，厚度1.8mm左右。后一次涂刷以上一次涂层不粘手为准。
3. The non-woven fabric or glass fiber cloth shall be painted for three times. When painting, the last one shall be 50mm wider and 1.8mm thicker than the previous one. The last coat shall not stick.
铆钉处漏水维修方法：应用阳光单组份防水胶涂刷4次，厚度大约1.5mm左右，直径50-60mm左右，下一次涂刷以上一次涂层不粘手为准，并一次比一次涂的直径大，呈中间厚圆周薄。这样铆钉处就不会漏雨了。
Repair method for water leakage at rivet: apply sunlight single component waterproof adhesive for 4 times, with thickness of about 1.5mm and diameter of about 50-60mm. The next time, the previous coating is not sticky, and the diameter of each time is larger than that of the previous one, showing middle thickness and thin circumference. In this way, the rivet will not leak.
Pay attention to some details. Generally speaking, color steel plate is not a big problem, so color steel plate is a good building material among building materials. If you have any good suggestions, please come to our website http://www.lxcaigang.com Consult!
