1. 在隔声技术中，混合钢板中间的玻璃棉需要在内外墙上填充，因此空分的隔音效果非常好。当然，有些碰撞声音是由固体扩散产生的，所以如果是有窗户的家庭墙，可以用中间有开口的两根墙柱来建造，而天花板上的一些固定石膏板则装有开口小的弹性结构，这样可以更好地减少钢板之间的固体声音扩散。
In sound insulation technology, the glass wool between the mixed steel plates needs to be filled on the inner and outer walls, so the sound insulation effect of the air separation is very good. Of course, some collision sounds are generated by solid diffusion, so if it is a family wall with windows, it can be built with two wall columns with openings in the middle, while some fixed gypsum boards on the ceiling are equipped with elastic structures with small openings, which can better reduce solid sound diffusion between steel plates.
2. 保温和技术为了达到更好的效果，通常在建筑物的外墙和屋顶上采用保温材料，以保证长期的保温效果。此外，在钢板等轻钢结构房屋中，除了填充墙柱之间的网格外，还在墙外粘贴一层保温材料，可以更有效地切断墙柱与外墙之间的热桥。
2. In order to achieve better results, insulation materials are usually used on the exterior walls and roofs of buildings to ensure long-term insulation effects. In addition, in light steel structures such as steel plates, in addition to filling the grid between the wall columns, a layer of insulation material is also pasted outside the wall to more effectively cut off the thermal bridge between the wall columns and the exterior wall.
3. 消防工程中的一个主要问题是如何应用它。通常，在许多轻钢结构中，防火层分为四层。例如，墙壁和钢天花板的两侧通常需要防火石膏板。
A major issue in fire engineering is how to apply it. Usually, in many light steel structures, the fire protection layer is divided into four layers. For example, fire-resistant gypsum boards are usually required on both sides of walls and steel ceilings.
维护方法:
Maintenance method:
1. 我们将按照与钢板相关的生产设备的操作流程进行操作。每次设备启动前，根据润滑图的要求，定期添加润滑油，添加的润滑油必须清洁无结。盘式发动机轴承中的润滑油也应经常更换。
We will operate according to the operating procedures of the production equipment related to steel plates. Before each equipment startup, add lubricating oil regularly according to the requirements of the lubrication diagram, and the added lubricating oil must be clean and free of knots. The lubricating oil in the bearings of the disc engine should also be replaced frequently.
2. 彩钢板应始终保持清洁，未涂漆部分应涂防锈油;每天工作前10分钟对钢板机进行润滑、擦拭和清洁。
2. The color steel plate should always be kept clean, and the unpainted parts should be coated with anti rust oil; Lubricate, wipe, and clean the steel plate machine 10 minutes before work every day.
3. 定期对开关、保险杠、手柄进行检查和维修，确保其可靠运行;经常检查彩钢板设备的三角带、手柄、旋钮、按钮等是否有损坏。如果磨损严重，应及时更换，并增加更换零件。
3. Regularly inspect and repair switches, bumpers, and handles to ensure their reliable operation; Regularly inspect the triangular belt, handle, knob, button, etc. of the color steel plate equipment for damage. If the wear is severe, it should be replaced in a timely manner and additional replacement parts should be added.
彩钢板主要用于屋顶和墙壁。这种材料的使用寿命约为25年，这意味着它与主要结构的使用寿命不同。主体结构已经使用了50年左右，所以25年后需要更换钢板。
Color steel plates are mainly used for roofs and walls. The service life of this material is about 25 years, which means it has a different service life from the main structure. The main structure has been in use for about 50 years, so the steel plate needs to be replaced after 25 years.
Thank you for reading. The source of this article is Yucheng Color Steel Factory. For more information and questions, please click http://www.lxcaigang.com We will continue to work hard to provide you with services. Thank you for your support!
