When installing the color steel composite board, the construction shall be carried out according to the correct construction sequence. In addition, some construction points need to be noted:

　　一、处理彩钢复合板时，一定要用干净的手套去触摸钢板，不要拉其它东西在粗糙的表面或钢板上。

　　1、 When handling the color steel composite board, be sure to touch the steel plate with clean gloves, and do not pull other things on the rough surface or steel plate.

　　其次，在安装彩钢板时，一定要拉线，以确保所安装的彩钢板边缘应在同一条线上，尤其是在安装块彩钢板时，一定要双向测试，并在调整后，才能锁定。每安装六个左右的极板，就需要对其进行测试，并随时进行调整，以避免累积偏差。

　　Secondly, when installing the color steel plate, it is necessary to pull a line to ensure that the edge of the color steel plate installed should be on the same line, especially when installing the first color steel plate, it is necessary to test it in two directions and lock it after adjustment. Every six or so plates are installed, they need to be tested and adjusted at any time to avoid accumulated deviation.

　　使用的工具必须是特殊的工具。

　　The tools used must be special.

　　彩钢复合板作为一种常用的轻质建材产品，其施工质量一直以来都有严格的要求，所以在安装施工时一定要注意主要的细节问题，避免后期施工带来的麻烦。

　　As a kind of commonly used lightweight building materials, the construction quality of color steel composite board has always been strictly required, so it is necessary to pay attention to the main details during the installation and construction to avoid the trouble caused by the later construction.

　　以上是济南彩钢生产厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.lxcaigang.com

　　The above content is introduced by Jinan color steel manufacturer. If you want to know more, please visit the website: http://www.lxcaigang.com