Color steel plate is becoming more and more popular. More and more buildings use color steel plate to make roof. It can be seen that color steel plate has great advantages. The construction of color steel plate not only requires the construction personnel to have corresponding technology, but also needs to be equipped with equipment to ensure the installation. However, sometimes we can find that the color steel plate is inclined. Why is this?

　　1、照温差：温度变化会使彩钢板产生较大的变形，尤其是夏季。在太阳光照射下，向阳面膨胀量较大，故钢柱便向背向阳光的一面倾斜。

　　1. According to temperature difference: the temperature change will make the color steel plate produce bigger deformation, especially in summer. Under the sunlight, the amount of expansion towards the sun is large, so the steel column inclines to the side with the back to the sun.

　　2、缆风绳松紧不当：严禁利用揽风绳强行改变彩钢板垂偏值。

　　2. Improper tightness of cable wind rope: it is strictly forbidden to change the vertical deviation value of color steel plate by using wind rope.

　　3、焊接变形：施焊后焊缝收缩变形对彩钢板垂直度影响很大，由于本工程焊缝较厚，所以累计误差的影响比较大。

　　3. Welding deformation: after welding, the weld shrinkage deformation has a great influence on the verticality of color steel plate. Due to the thick welding seam of the project, the cumulative error has a greater impact.

　　4、安装误差：由安装过程中碰撞及彩钢板本身几何尺寸偏差引起，也包括校正过程中测量人员操作的误差。

　　4. Installation error: it is caused by collision during installation and geometric dimension deviation of color steel plate itself. It also includes the error of measurement personnel during calibration.

　　以上就是我们给大家介绍的彩钢板使用后发生倾斜的原因，我们在操作时要多加注意以上情况，尽量避免出现上述情况，如果大家想了解更多相关信息，欢迎给我们留言。

　　The above is the reason why the color steel plate inclines after use. We should pay more attention to the above situation during operation, and try to avoid the above situation. If you want to know more about it, please leave us a message.