胶管的种类很多，材质不同，环境也不同。事实上，滴胶管的使用时间除了与质量有关外，还与很多因素有关。比如保养和使用条件，即使它的质量很好，在使用的时候如果不小心，也会降低它的使用寿命。以下是使用

There are many types of rubber hoses, with different materials and environments. In fact, the usage time of drip hoses is not only related to quality, but also to many factors. For example, maintenance and usage conditions, even if its quality is good, if not careful during use, it will reduce its service life. The following is the use of

彩钢滴胶管时应注意的几个方面。

Several aspects to pay attention to when using color steel drip hoses.

一、软管的长度很重要，因为这关系到它所承受的压力，不能超过压力范围。不能用它来输送不能输送的物料会影响它的使用寿命。滴胶管的长度一定要正确使用，不能超过这个长度范围。

1、 The length of the hose is important because it is related to the pressure it bears and cannot exceed the pressure range. It cannot be used to transport materials that cannot be conveyed, which will affect its service life. The length of the drip hose must be used correctly and cannot exceed this length range.

二、对它输送的介质的温度也有要求，不能低于40度，也不能高于120度，否则会损坏滴胶管，降低其使用时间。它的较小弯曲半径不可能小于这个范围。如果再小一点，就不能用了，在彩钢复合板接合处也不能弯曲。否则液压传动不顺畅，物料输送不顺畅。

2、 There are also requirements for the temperature of the medium it transports, which cannot be lower than 40 degrees or higher than 120 degrees, otherwise it will damage the drip hose and reduce its service time. Its smaller bending radius cannot be smaller than this range. If it's a little smaller, it won't work and won't bend at the joint of the color steel composite board. Otherwise, hydraulic transmission will not be smooth and material transportation will not be smooth.

三、不要在扭结的情况下使用彩钢复合板滴胶管，搬运时要小心，避免尖锐刺破，也不要在粗糙的接口上硬拽，不要过度弯曲或压平。定期清洁，避免杂物堵塞彩钢复合板的清洁，特别是一些关键的地方，要经常清洁，防止杂物进入其中，阻碍液体的畅通，损坏设备。胶水使用滴胶管需要注意的事项，我们一定要按标准操作。

3、 Do not use the color steel composite plate drip hose in twisted situations. Be careful when handling to avoid sharp punctures, and do not forcefully pull on rough interfaces. Do not excessively bend or flatten. Regularly clean to prevent debris from blocking the cleaning of color steel composite panels, especially in key areas. It is important to clean regularly to prevent debris from entering, hindering the flow of liquids, and damaging equipment. The precautions to be taken when using a dropper for glue are that we must follow the standard operation.