1、 基层处理

1. Grassroots treatment

确认待安装处无灰尘、无油脂、无锈蚀、无松动等，表面干燥，如有防潮防腐需求，可适当采取涂层处理，找平层达到要求，基层验收合格。

Confirm that the installation site is free of dust, grease, rust, looseness, etc., and the surface is dry. If there is a need for moisture-proof and anti-corrosion, appropriate coating treatment can be taken. The leveling layer meets the requirements, and the base layer is accepted as qualified.

2、 弹线控制和悬挂基准线

2. Spring line control and suspension reference line

根据建筑实际立面设计和外墙技术要求，弹出门窗水平线、垂直控制线和装饰缝线等，在建筑外阴阳角和其他适当处悬挂垂直基准线和水平线，以确保安装平整度和垂直度符合施工要求。

According to the actual facade design and external wall technical requirements of the building, draw horizontal lines, vertical control lines, and decorative stitching lines for doors and windows. Hang vertical reference lines and horizontal lines at the external corners and other appropriate positions of the building to ensure that the installation flatness and verticality meet the construction requirements.

3、铺设施工

3. Laying construction

挑选合适的彩钢岩棉复合板，规格和外观尺寸偏差均在规定范围内，裁剪下料后，按设计要求选择复合板横向还是竖向布置（注意横向布置时每块板两个卡件，竖向布置时板上下左右各一个卡件），并用膨胀螺栓锚卡件进行固定，拼缝大小符合施工要求，板和毡的接头对接一定要十分紧密，在多层保温时各十字接缝应交错分开，避免形成热桥和冷桥。

Select a suitable color steel rock wool composite board with specifications and dimensional deviations within the specified range. After cutting and cutting, choose whether to arrange the composite board horizontally or vertically according to the design requirements (note that there are two cards for each board when arranged horizontally, and one card for each board on the upper, lower, left, and right sides when arranged vertically), and fix it with expansion bolts anchor cards. The joint size should meet the construction requirements, and the joint connection between the board and felt must be very tight, When using multi-layer insulation, the cross joints should be staggered and separated to avoid forming hot and cold bridges.

4、 涂抹胶粘剂

4. Applying adhesive

按比例要求配制彩钢岩棉复合板专用胶粘剂，充分搅拌后的胶粘剂应色泽均匀、新鲜良好、稠度适宜，粘度要达到使刚粘贴上的岩棉板不会下垂。将配制好的胶粘剂按规定厚度，均匀地涂抹在岩棉板上，可采用条形点粘方式进行粘接，以确保牢固可靠。

Prepare special adhesive for color steel rock wool composite board according to the proportion requirements. After thorough mixing, the adhesive should have a uniform color, good freshness, appropriate viscosity, and a viscosity that ensures that the newly pasted rock wool board will not sag. Apply the prepared adhesive evenly to the rock wool board according to the specified thickness, and use a strip point bonding method to ensure firmness and reliability.

本文由禹城彩钢复合板友情奉献.更多有关的知识请点击:http://www.lxcaigang.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待

This article is a friendly contribution from Yucheng Color Steel Composite Board. For more related knowledge, please click: http://www.lxcaigang.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned