您对
济南彩钢板产品的应用了解多少？储存彩钢板产品时应远离哪些物质？接下来，我们的服务人员会给您一个简单的解释。
How much do you know about the application of Jinan color steel products? What substances should be kept away from when storing color steel products? Next, our service staff will give you a simple explanation.
1.彩钢板在储存、运输和使用过程中应远离酸、碱、盐、有机溶剂和其他腐蚀性物质；防止雨水和冷凝，不要浸泡在水或泥浆中。
1. The color steel plate shall be kept away from acid, alkali, salt, organic solvent and other corrosive substances during storage, transportation and use; Prevent rain and condensation. Do not immerse in water or mud.
2.运输彩色涂层板时，应使用薄膜将各层隔开，以避免相对滑动和划伤。在正常气候条件下使用，涂层板作为屋顶的坡度不得小于10度。
2. When transporting the color coated plate, the layers shall be separated by a film to avoid relative sliding and scratching. When used under normal weather conditions, the slope of the coated board as the roof shall not be less than 10 degrees.
3.彩钢板加工的环境温度应在7℃以上；根据彩钢板厚度调整加工辊系间隙，辊面及支撑板上的异物；同时，检查彩钢板两侧的油漆是否脱落。如果油漆脱落，应查明原因并采取措施，然后再继续处理。
3. The ambient temperature of color steel plate processing shall be above 7 ℃; Adjust the gap of the processing roll system according to the thickness of the color steel plate, and remove the foreign matters on the roll surface and the support plate; At the same time, check whether the paint on both sides of the color steel plate falls off. If the paint falls off, find out the cause and take measures before continuing to deal with it.
不同类型的彩钢板面漆在硬度、柔韧性、附着力和耐久性方面存在差异。聚酯是一种应用广泛的涂料，具有一般的耐久性、良好的硬度和韧性以及适中的。硅改性聚酯具有较高的耐久性、光泽和保色性，但其韧性略有降低。
There are differences in hardness, flexibility, adhesion and durability between different types of color steel plate finish. Polyester is a widely used coating with general durability, good hardness and toughness and moderate price. Silicone modified polyester has high durability, gloss and color retention, but its toughness is slightly reduced.
高耐候性聚酯具有高性价比。PVDF具有优异的耐用性、良好的韧性，但硬度低、可用颜色少、高。彩钢板面漆主要受用途、使用环境、腐蚀性、使用寿命、耐久性、加工方式、变形程度等因素影响。
High weather resistant polyester has high cost performance. PVDF has excellent durability and good toughness, but low hardness, less usable colors and high price. The color steel plate finish is mainly affected by such factors as use, use environment, corrosivity, service life, durability, processing method, deformation degree, etc.
彩钢板采用高强度钢板，可大大减少钢板厚度，从而减轻钢结构重量，节约钢材。与铝合金相比，彩钢板在强度上具有更显著的优势。
Color steel plate adopts high-strength steel plate, which can greatly reduce the thickness of steel plate, thus reducing the weight of steel structure and saving steel. Compared with aluminum alloy, color steel plate has more obvious advantages in strength.
对于相同厚度的两种材料，彩钢板承受的力是铝合金的两倍以上。耐腐蚀性好，使用寿命长。一般来说，钢容易生锈。油涂层可以在几个月内防止钢材生锈。涂漆通常可以确保钢材在2-3年内不会生锈。热镀锌后，辊涂涂料大大提高了钢材的耐腐蚀性。
For the two materials with the same thickness, the strength of color steel plate is more than twice that of aluminum alloy. Good corrosion resistance and long service life. Generally speaking, steel is easy to rust. Oil coating can prevent steel from rusting in a few months. Painting usually ensures that steel will not rust within 2-3 years. After hot galvanizing, roller coating greatly improves the corrosion resistance of steel.
Color steel plate has good processing performance. It can be used for cutting, punching, bending, folding and other processing. Color steel plate has good decoration, rich color and good decoration, which is incomparable with ordinary steel plate and aluminum alloy plate. Please pay attention to our website if you need http://www.lxcaigang.com , provide you with a variety of products!
